GIGABYTE B850M GAMING X WIFI6E AMD AM5 LGA 1718 Motherboard, mATX, DDR5, 2x M.2, PCIe 5.0, USB-C, WIFI6E, 2.5GbE LAN, EZ-Latch

No issues

It worked flawlessly on the first boot. Upgraded the bios with no issues. My build is a basic no overclocking setup. One note is the cpu is very close to the memory slots. Make sure your cpu cooler is tall so that it clears the memory stick.

Pros: No issues

Cons: Non

Great

After weighing my options for price with features I would be using this was a good buy that has not had a problem yet.

Pros: Good Price and everything worked from the first go. I knew what I was getting when ordered.

Cons: no front usb 3? I have a connector from my case, couldn't find a spot for it. Not a big deal.

Just works, easy BIOS

-Would totally recommend. Easy setup and good amount of ports.

Pros: -BIOS is relatively easy to navigate for minor changes like EXPO/XMP, adjusting fan curves/profiles, etc. -Top PCIe slot for mATX cases/large GPUs -USB-C in I/O -Stable with 9600x

Cons: -Wireless Antenna is a bit awkward, but at least it's magnetic so sticks to my Lian Li A3 anywhere. Wish it were just normal antennas. -Memory/RAM slots are pretty close (like plenty of mATX boards), if your memory is even slightly tall, it may be in contact with an Air Coolers fans.

No Issues With Installation, Just a Few Minor Cons

Overall, the size of the board (relative to modern components) is a bit of a detractor, and more M.2 slots would be nice. For a cheaper motherboard, it hasn't given me any issues thus far in the 2 weeks I have had it installed, and the manual was easy to follow. It does its job and didn't give me any issues during installation, which are the main things I look at in a motherboard. If you find a similar bundle deal as I did, go for it. But if you are buying individual parts, I would buy an ATX board for the extra leg room.

Pros: -Did not give me any issues on install, BIOS, or otherwise. XMP profile is a quick button -Smaller size of mATX boards gives more working space for whatever peripherals/fans you want to install near the bottom of the case.

Cons: -mATX is a tight fit for parts, will be difficult to squeeze in current cards (RTX 5000 series, Radeon RX 9000 series). My CPU air cooler and my RTX 5070 Ti give me barely any room to put my fingers in if I need to fix something. Not the end of the world, but it can be annoying if you have especially large or clumsy fingers (see photo). -Could use another M.2 slot, given how emphasized they are nowadays, but couldn't beat the sub-$400 price of the CPU/RAM/Mobo bundle I got this in.

Compact but workable

I've never built with a mATX format before and was worried I might miss out on features and make the build a little more awkward. However, I did most of the build outside of the case making it easier to install the larger components. Note the main M.2 slot is right under the GPU so make sure you install the drive first. That said, there are a few quick release catches that make it easy to reverse any such missteps. Once in the case things do get a little tight trying to plug the multiple connectors, some being easier than others and small hands are of benefit. I moved a Windows drive directly from an old MSI board and it booted immediately, even before adding drivers or setting up the BIOS. Went far smoother than I imagined.

Pros: - compact - clean - quick release features

Cons: - mATX can be tight to work on

Decent next gen motherboard

Decent motherboard for its price not the greatest or the worst but a solid choice specifically for a higher end PC in a micro ATX case(paired it with a 7800X3D)[ My only real grievance is not buying 24 hours later when it came with free ram but not motherboards or new eggs just me me being unlucky and ranting].

Pros: Pcie 5.0(good for RTX 50 series, decent vrms for overclocking, WiFi 6E, ez-Latch, and you can install the SSD without a screwdriver(this and the ez-Latch make it beginner friendly).

Cons: Gigabyte control Center(it is anything but beginner friendly and unnecessarily complicated), some silicon power ram not being compatible, AIO pump connector placement(on the side under the 24 pin connector and above the sata connectors).

Great new mobo

Anyone looking for a decent mATX board for AM5 should look at this board.

Pros: I purchased with no reviews on any of the B850 boards as a gamble. But I don't use alot of the same features as others for there mobo use cases. Easy to set memory overclock, wifi antenna works great. Router is 3 rooms away and I can pick up no problem and get 350mps on a 400mps plan. Definitely use it if your using a bluetooth controller, most people forget your antenna is half wifi, half wifi/bluetooth.

Does it's job

This mobo wasn't my first choice, but at the same time I'm not disappointed and don't regret it. Had the headers I need, looks nice. No issues whatsoever with my 9800x3d and 7900xtx. My initial concern was the fact it has 3 display out and 2 less usb than my first choice mb. This was solved by getting a USB hub with external power.

Cons: More display out means means less usb